Linen Peasant Blouse Tutorial

Linen Peasant Blouse Tutorial

Peasant tops are making a comeback at the moment. With its signature, bohemian-enthused aesthetic, the peasant blouse is the perfect choice of clothing for summer and a great way to add some effortless chic to your everyday wardrobe.

Plus, a peasant top made from linen makes so much sense! Linen fabric is breathable, allowing air to pass quickly through the fibers and keeping the skin cool. And its gently crinkled texture feels incredibly romantic and creates that lived-in look that we love so much about this fabric!

Add a touch of sun to your wardrobe with our lovely blouse!

Materials

1.5 yards of IL042 901 – FS Premier Finish – 100% Medium Weight Linen

1 fat quarter of IL042 907 Premier Finish Medium Weight linen for the ties, binding and cuffs.

Matching sewing thread

Tools

Pattern paper, scissors, fabric marker, pins, ruler, seam riper, chalk, measuring tape, 18 mm bias tape maker, sewing machine

Difficulty

Beginner

Time

3-4 hours

Pattern

You can access the multi sized PDF pattern HERE

Note that you’ll also need to make one continuous strip of bias tape for neckline binding and ties(around 35-40 inches long) and 3 small strips for the slit binding (1 x 9″ long) and the cuffs (2 x 10,5“ or to the measurement of your elbow). For detailed instructions on how to cut and make your bias tape please follow this tutorial

Steps

Note: Prewash your fabric and tumble dry it until it is still slightly moist, dry in room temperature. Iron the fabric so it is easier to work with.

1. Let’s start with the front slit. Bind your slit with contrasting bias tape by following this detailed tutorial HERE.

2. Pin and sew the sleeve to the armhole right sides together.

3. Trim the seam allowance down to 1/4″ (6 mm) and serge/zigzag the raw edges together to prevent the fabric from fraying.

4. Press the seam allowance to one side (preferably, towards the back of your blouse).

5. Repeat with the other sleeve.

6. Pin the sleeve at the underarm and the side seams right sides together.

7. Sew the sleeves and the sides all in one seam at a 3/8” (1 cm) seam allowance. Trim the seam allowance down to 1/4″ (6 mm) and serge or zigzag the raw edges together. Press the seams flat folding the serged/zigzagged edges to one side.

8. Use your two 10,5” bias tape strips as cuffs. To assemble these cuffs, unfold your tape, join the two ends right sides together and stitch.

9. Gather your sleeve opening to the length of your finished cuff. Follow this step-by-step tutorial that explains how to gather fabric.

10. Follow the instructions in this tutorial and complete the gathered sleeves.

 

It’s time to gather the neckline, attach the bias tape binding and create the ties.

11. Gather your neckline the same way you did with the sleeves. Take your long strip of bias tape, press it in half lengthwise then find the center of the strip by folding it in half. Pin to the center back matching the centers and “sandwiching” the gathered neckline. Use plenty of pins to make sure your neckline is seated correctly. Make sure the neckline edge is inserted all the way into the crease of the tape and that the bias tape is not too lose nor too tight. Otherwise your finished neckline might gape at the shoulders.

12. Fold one of the ends towards the inside as shown in the picture below:

13. Clip the corners to eliminate bulk.

14. Now fold your end in half lengthwise in the continuity of the bias tape and pin to form the ties.

The length of the ties is really up to you. Ours are 18” (46 cm) long.

15. Start edgestitching the tie from the folded end and all the way around the neckline until you reach the other end. Repeat steps 12-14 and stitch the other end. Don’t forget to press when you are done.

Here’s what your finished neckline should look like:

16. Lastly, finish the bottom hem by folding and pressing the fabric twice to the wrong side (3/8” to 1/2”) and stitch as close to the folded edge as possible.

Give your blouse a good press and you’re all done! Such a great summer basic perfect for packing away on your next vacation!

A peasant top is the perfect backdrop for bold color and playful prints. Check out our selection of linen fabrics and see which color inspires you for this beautiful project!

31 comments

  1. Carolyn

    Hi! Just wondering about the difference in length in the sleeve seam and the shirt front seam and the sleeve seam and the shirt back seam. When I calculate the length of fabric for the seamline in the sleeve, it is 9.65″, versus 9.01″ for the shirt front. For the back, the sleeve seam is 10.54″ and the shirt seam is 9.72″. Is there a reason these lengths do not match up? I am trying to make adjustments in the arm hole widths, so it would be nice to know if my numbers need to match up or if there is a reason behind these lengths that I am missing. Thanks!


    1. Author
      Rima Khusainova

      Dear Carolyn, unfortunately I don’t have the paper pattern that I’ve used to make this blouse in front of me to double check, but when I was sewing it everything seemed to match. However, since the raglan sleeves edges are part of the neckline curve and the front neckline is deeper than the back, that could explain that the front is shorter than the back.

  2. Alice

    I didn’t notice that seam allowances were to be added. By using 1/4″ seam allowance I find the blouse fits fine over my 38″ bust with plenty of ease. Next draft I’ll add them and try to figure out how to make the sleeve seams equal.


    1. Author
      Rima Khusainova

      Dear Alice, sorry if the instructions for the seam allowances were not very clear but I’m happy to hear that you are pleased with the result anyway!

  3. Alice

    The draft has the sleeve back seam 1″ longer than the front sleeve seam. You don’t show any dart or ease in instructions. Was this a design error? Seems wrong to just cut the bottom edge off grain.


    1. Author
      Rima Khusainova

      Hi Alice, the reason why the sleeve back is 1″ longer than the front is because of the shape of the neckline (the front is a little bit deeper).

      1. Alice Elliot

        Not the sleeve/bodice seam. The sleeve front/sleeve back seams are different. If you want the underarm seams to match you need to adjust something. Look at the pattern again. The sleeves attach to the front and back at bodice just fine.

  4. Alice

    From the suggested cut length of the neck and tie binding bias strips , 35-40″ and your stating you left 18″ ties there would only be 4″ at most for the neck. I think you must have meant 18″ for 2 9″ ties. Then it se me we are to gather the neck to about 17-20″. I can see it will be tricky to try on for fit at the neck with all those pins!! I’ve. Drafted my pattern and cut my wearable muslin. Wish me luck with the neck.


    1. Author
      Rima Khusainova

      Dear Alice, sorry for the confusion but the two 9″ strips of fabric were meant to be used for the gathered sleeves. As for the neckline binding+ties, you need to cut one continuous strip of fabric cut on the bias around 35-40″ long (or longer if you want longer ties). Hope this helps.


    1. Author
      Rima Khusainova

      Dear Sara, to download the diagram with the pattern, simply click on the word HERE in pattern section (just under the introductory text and list of materials and tools.

    2. Alice

      It’s an easy draft from the picture. Look closely and you’ll see the drafting lines to get the neck and armhole shape. Take the time to measure carefully and you’ll have it!

  5. Patty S.

    Judy, I did do that, and based on this pattern’s panel measurements, it appears that it will measure 47″ across the bust. BUT, I STILL want to know where to find their pattern size measurements 🙂 Just so I have them. I don’t know if a “M” is a pattern medium or a ready to wear medium. Which are completely different things. I would like to see a hyperlink in their tutorials, when they mention the sizing, to their sizing chart. That would be very nice. And/or a sizing table added to their pattern tutorials. Simple thing. The linen is just too nice to cut into, and feel apprehensive about the sizing.

  6. Sherry

    How is a person supposed to print off this pattern? When enlarging it to 100% it will only print a small portion of one piece of the pattern. I have been looking for a simple top just like this one without luck. Would love to make this out of the lilac linen I bought from you. Hope you can supply me with instructions to print an actual pattern and not just a line drawing. Thank you for your tutorials and lovely fabrics.
    Sherry

    1. Sherry

      I guess there is no real pattern. The line drawing indicates inches and we are supposed to take it from there. Sorry if this sounds ungrateful. Perhaps I’ll make this top out of muslin first prior to cutting into my nice linen. Thank you.


      1. Author
        Rima Khusainova

        Dear Sherry, unfortunately this pattern is not real size printable pattern. It is a diagram that you can easily copy onto a large sheet of pattern paper. Trying the fit on muslin first is always a great idea!

  7. Karen Flagg

    Hi, I love and appreciate your tutorials. I do have one suggestion though, and that is to request straight-on shots by the photographer, so we can see the proper sleeve type, length of the blouse, front and back neckline and the way it fits in all areas. This is very important to sewists when selecting a pattern, I do understand that the model will not be able to use all the cute and interesting poses, but maybe you can include one cute pose and make the others basic, front or back-on shots. That would be very helpful.Thank you

  8. Patty S.

    Love this little peasant blouse pattern! You mention the pattern will fit an XS to M, but I can’t find where you have measurements for pattern sizes? Not sure if I would fit a M?

    1. Judy

      It looks like this is a “one size fits most” garment. You can calculate the measurements from the pattern. For a “blousy” fit, take your bust, waist and hip measurements and add 4″. Good luck!

      1. Patty S.

        Judy, I’ve already done that, and based on the pattern dimensions, looks like the pattern would be 47″ finished across the bust line. BUT, I still want to know what their pattern sizes are. A “M” can mean something very different in pattern sizing, versus ready to wear sizing. I wear a medium in ready to wear, but in a pattern, probably a large (40″ bust). So, it would be very nice is they had a hyperlink in their tutorials when they mention sizing, that would link to a sizing table with measurements. And/or had the sizing table in the article as well. The linen is just too nice to take a chance cutting into it, without a bit more verification. At least, for me 🙂

    2. Adele

      The verbiage above suggests you add an inch all around for larger sizes – personally, I’ll probably add 2 inches!

    3. Diane

      The front and back are cut on the fold and they are 11.75 inches wide that equal 47 inches around the body. How big is your bust and hips id your hips is 22 inches from your back neck bone. 11.75 X 4 = 47 minus seam allowances. I wear and extra Large or a side 16 so I will be adding a little more than 1 inch for comfort.


      1. Author
        Rima Khusainova

        Dear Diane, thank you so much for this clarification and your help! I’m sure a lot of our readers will find it very useful.


    4. Author
      Rima Khusainova

      Dear Patty! The measurements we use for our patterns are based on general sizes like Small (S) Medium (M) and Large (L). So if you normally wear one of those sizes, then you’ll most likely find the fit of our pattern similar to your store bought items. You can however double check the fit but measuring yourself with a measuring tape and comparing it with the measurements provided in our diagrams. As in case of this blouse, the finished bodice width will be equal to 47”. If your personal measurements are smaller than this number, then the blouse will most certainly fit you. This being said, I do agree with you that it would be nice to come up with some kind of measurements table in the future so I promise, I’ll look into it soon!

Leave a Reply

Your email address will not be published. Required fields are marked *